Menu

Machine Maintenance Worker (Level 3 · 4 · 5)

Machine Maintenance Worker Certificate · Vocational Qualification Certificate

Machine Maintenance Worker Certificate what is it?

The Machine Maintenance Worker certificate is officially known as the MYK Machine Maintenance Worker Vocational Qualification Certificate. It is defined in three national qualifications, Level 3 (10UY0002-3), Level 4 (10UY0002-4) and Level 5 (10UY0002-5); the certificate for each level is obtained through a separate examination conducted by certification bodies authorized by the Vocational Qualifications Authority (MYK).

The legal basis of the certificate is MYK Law No. 5544: persons without an MYK vocational qualification certificate cannot be employed in occupations that are classified as hazardous or very hazardous and listed in the communiqués published by the Ministry. Machine maintenance falls within this scope; the certificate is not just a credential, it is a legal requirement for starting work.

Which document Who needs it?

In machine maintenance, two separate obligations are often confused:

The MYK Vocational Qualification Certificate is issued TO THE PERSON, while the obligation not to employ uncertified staff rests TO THE BUSINESS.

To work in this job, an MYK certificate is required; your employer cannot employ personnel without this certificate. Both sides rely on the same certificate.

  • MYK Level 4 Certificate

    It is given to the person.
    Experience requirement
    No — The exam is taken directly.
    Education requirement
    No — Preparation is optional.
    Where is it obtained?
    From an MYK-authorised certification body (such as ADEN)
  • Employer's certification obligation

    It belongs to the business.
    Scope
    Occupations listed in the communiqué on hazardous and very hazardous work
    Obligation
    Persons without a certificate cannot be employed in these occupations
    Audit
    Ministry of Labor and Social Security labor inspectors

Exam requirements and common misconceptions

Misconception "You need experience to take the exam."
Real

It's not necessary.

To take the MYK Machine Maintenance Worker (Level 4) exam, no prior experience or training is required; those new to the profession can take the exam directly.

The certificate is obtained through passing an exam, not through a course.

Misconception "Completing the course is mandatory to receive the certificate."
Real

There is no course completion requirement.

Courses can help with preparation; however, the certificate is obtained through an exam, not through a course.

There is nothing preventing a candidate who has not taken the course from passing the exam.

Misconception "A mastery certificate and an MYK certificate are the same thing."
Real

These are certificates issued by different institutions.

A master craftsman certificate is issued by the Ministry of National Education under Law No. 3308 at the end of the apprenticeship-journeyman process; a Vocational Qualification Certificate issued by the Vocational Qualifications Authority (MYK) is obtained through an examination that has no prerequisites.

According to MYK, in occupations where a certificate is mandatory, a mastery certificate or a vocational-technical diploma issued IN THE RELEVANT FIELD also satisfies the work requirement.

If you do not hold a mastery certificate or diploma in the relevant field, the exam-based MYK certificate is the fastest way to meet this requirement.

Exam structure and fees: open and transparent tariff

Machine Maintenance Worker (Level 4)

The 10UY0002-4 National Qualification defines the following units (mandatory: 1, elective: 2); the table below lists the exam type and fee for each unit separately.

To obtain the certificate, you must pass each unit separately.

Machine Maintenance Worker (Level 4) — exam units and fees
Unit Code/Name Requirement Exam Type Duration Passing Grade Exam Type Fee Unit Fee
10UY0002-4/A1 Occupational Health and Safety, Environment and Quality Mandatory T1 Theoretical (written) 20 question · 30 min 60/100 750 TL 750 TL
10UY0002-4/B1 Preventive Maintenance Elective T1 Theoretical (written) 36 question · 54 min 60/100 750 TL 10,500 TL
P1 Practical (hands-on) 80/100 9,750 TL
10UY0002-4/B2 Corrective Maintenance Elective T1 Theoretical (written) 25 question · 38 min 60/100 750 TL 11,250 TL
T2 Theoretical (oral) 7 question 60/100 750 TL
P1 Practical (hands-on) 80/100 9,750 TL
Total exam fee (lowest package) 11,250 TL

The certificate printing fee (1,500 TL) is added to the exam fee; both are paid together at application. If you do not qualify for the certificate, the printing fee is refunded.

Upcoming exam dates

Machine Maintenance Worker (Level 4)

You can apply directly for the sessions below, or contact ADEN via the Quick Application to schedule your exam date.

Elective Units

20.11.2026 Friday

A1 B1 B2

08:30 · ADEN Exam Centre, Central District/Elazığ

Elazığ Directions Apply
Occupation
Machine Maintenance Worker (Level 4)
Elective Units
Corrective Maintenance, Preventive Maintenance
Date
City
Central District/Elazığ
Location
ADEN Exam Centre
Address
Yeni Karma Sanayi Sitesi 9. Sokak No:4 Akçakiraz, Central District/Elazığ
View on Map

18.12.2026 Friday

A1 B1 B2

08:30 · ADEN Exam Centre, Central District/Elazığ

Elazığ Directions Apply
Occupation
Machine Maintenance Worker (Level 4)
Elective Units
Corrective Maintenance, Preventive Maintenance
Date
City
Central District/Elazığ
Location
ADEN Exam Centre
Address
Yeni Karma Sanayi Sitesi 9. Sokak No:4 Akçakiraz, Central District/Elazığ
View on Map

Don't the dates on the list suit you? Complete your application and we will set your exam session together with you.

From application to certificate step-by-step process

  1. 1

    Choose your occupation

  2. 2

    Choose the exam date

  3. 3

    Submit your application and pay the fee.

  4. 4

    Receive your certificate

Exam rules

  • Exam Entry

    • Valid photo identification is required. Verification is done with a Turkish ID card or passport; candidates whose identity cannot be verified will not be admitted to the exam.
    • Please inform us of your specific needs in advance. Arrangements are made in the examination environment to accommodate needs related to disability or health conditions.
    • You will be notified of the exam location and time. Entry will not be permitted 15 minutes after the exam begins; it is recommended that you arrive at the exam venue at least 30 minutes beforehand.
  • Prohibitions During the Exam

    • Electronic devices may not be used. Mobile phones, smartwatches, and similar devices must be switched off and handed over for the duration of the exam.
    • Cheating and communication are prohibited. Communicating with another candidate or attempting to cheat will invalidate the exam.
    • The question content cannot be exported. Exam questions and materials are confidential; they cannot be saved or shared.
    • Exam materials are handed in. The question booklet and answer sheet must be returned to the invigilator intact at the end of the exam.
  • Exam Format

    • Theoretical (T1): A four-option multiple-choice test, 1.5 minutes per question; it measures the knowledge items of the units.
    • Scoring: Incorrect answers do not cancel out correct answers (blank and incorrect answers are counted as the same); multiple markings are considered incorrect.
    • Performance (P1): It is evaluated using a checklist and scenario; successful completion of all critical steps is essential. 21 critical step
    • Theoretical Oral (T2): assessed with oral questions; the number of questions is shown in the fee table.
    • Each unit is evaluated separately. The passing grade, time limit, and number of questions vary depending on the unit; they are listed unit by unit in the tariff table. Go to the table
  • After the Exam

    • If there is a failed unit: You will only retake the exam for that specific unit; your successful unit results will be retained.
    • Right to a make-up exam: According to the regulations, you have the right to a make-up (second) exam. The make-up exam fee will be determined separately.
    • Right to appeal: lodged by petition within 10 days of notification of the result and assessed impartially. Appeal process
    • Certificate delivery: Successful candidates will receive an MYK Vocational Qualification Certificate, which will be printed and delivered to them via ADEN.

Certificate renewal: 5 years What happens in the end?

At the end of the five (5) year validity period, the certificate holder's performance is evaluated using at least one of the methods described below;

  • Renewal without exam

    Submitting records (service record, reference letter, contract, invoice, portfolio, etc.) showing that they have worked in the relevant field for at least two years in total or for the last six months within the 5-year certificate validity period,

  • Renewal without exam

    Participating in the practical exams defined for the qualification units included in the qualification. The certificate validity period of candidates with a positive evaluation result is extended for another 5 years.

The validity period of the certificate is extended for candidates who meet at least one of the methods.

The steps, requirements and fee of the renewal application are explained in detail on the How to Renew an MYK Certificate? page.

Calculation tools

Calculate the amounts most frequently asked about in your occupation in seconds. All are free and require no membership.

  • Salary and Payroll
  • Other Calculation Tools
  • Certification requirement: Scope of hazardous jobs

    Machine maintenance is among the occupations for which an MYK certificate is mandatory. The correct order is as follows:

    • 1

      Obtain the MYK Level 4 certificate.

      You can obtain a Machine Maintenance Worker MYK Certificate from an Authorized Certification Body authorized by MYK and accredited by TÜRKAK (such as ADEN).

    • 2

      Present your certificate to your employer

      Employers cannot employ uncertified personnel in this profession, which falls under the category of hazardous work; your certificate will be included in your employment file.

    • 3

      Renew before it expires

      The validity period of the certificate is defined in the national qualification; renewal can be done with or without an exam before the expiration date.

    When labour inspectors find that uncertified personnel are employed, an administrative sanction is imposed on the employer. The amount of the sanction is revalued every year; for the current amount, please refer to the announcements of the Ministry of Labour and Social Security.

    Frequently asked questions

    Is this document mandatory?

    According to the Vocational Qualifications Authority (MYK) Law No. 5544, individuals without an MYK Vocational Qualification Certificate cannot be employed in hazardous and very hazardous occupations, as specified in the communiqués published by the Ministry. Machine Maintenance Workers fall within this scope, and their qualification is regulated by 10UY0002-4.

    From which institution should this document be obtained?

    The certificate can only be obtained from certification bodies authorized by MYK and accredited by TÜRKAK. ADEN is one of these bodies.

    Are there any prerequisites for taking the exam?

    There is no training or experience requirement. The qualification exam entry requirements section of National Qualification 10UY0002-4 does not define any training or experience requirement. Under MYK exam rules you must be at least 18 years old.

    Which level should I get?

    Level 3 is for maintenance workers who perform maintenance tasks according to instructions, while Level 4 is for maintenance workers who take on broader responsibility in maintenance planning and troubleshooting; at Level 5, machine installation is also a mandatory unit. The job description and employer will determine which level is required.

    What units are included in the exam?

    Mandatory unit: Occupational Health and Safety, Environment and Quality (A1). Elective units examined at ADEN: Preventive Maintenance (B1), Corrective Maintenance (B2). The scope of the units and the types of exams are listed in the table on our occupation page.

    Do I have to take all the elective units?

    No. The required number of elective units are selected according to the selection rules defined in the national qualification; we will determine your unit scope together during the application process.

    What happens if I fail a unit of the exam?

    You only retake the unit you failed; your results for the units you passed remain valid.

    What's included in the price?

    The total fee charged at application ranges from 12,750 to 24,000 TL depending on the elective units you choose: 11,250 – 22,500 TL exam fee (theory + performance) and 1,500 TL certificate printing fee. If you do not qualify for the certificate, the printing fee is refunded.

    What happens if I fail?

    According to the regulations, you have the right to a make-up (second) exam; you only retake the exam for the section you failed.

    Is the exam online or in person?

    Exams are conducted in person. In accordance with current MYK (Vocational Qualifications Authority) regulations, remote (online) exams are not held for this national qualification; theoretical and performance exams are conducted at an examination center/practice facility.

    Will the certificate appear on e-Devlet?

    Yes. The MYK Vocational Qualification Certificate can be viewed through the MYK Certificate Inquiry and in your e-Devlet account.

    Is the certificate valid throughout Türkiye?

    Yes. The MYK Vocational Qualification Certificate is officially valid throughout Türkiye. Thanks to TÜRKAK accreditation, it also has international recognition.

    How many years is the certificate valid?

    The validity period of the Machine Maintenance Worker certificate is defined in the national qualification; it can be renewed with or without an exam before the expiration date.

    How can my employer verify my certificate?

    Your employer scans the QR code on your certificate or MYK ID card on our certificate verification page and confirms its validity in seconds. You can also look up your exam results and certificate status on the candidate lookup page.

    How long does it take to receive the certificate?

    Once the results are finalized and a decision is made, your certificate will be printed by MYK and delivered to you.

    Can I take the exam before finishing the course?

    Yes. There is no course requirement to take the exam; preparation is entirely optional. The certificate is obtained through exam success, not through a course.

    Is it possible to obtain a machine maintenance worker certificate without taking an exam?

    No. MYK certificates are only obtained by passing theoretical and performance exams. Certificates issued by websites that sell certificates without exams are not MYK certificates.

    Who can apply and what are the requirements?

    There are no prerequisites: no experience, internship or education is required; being at least 18 years old is enough. Your identity details are enough to apply.

    Preparer: ADEN (MYK authorized YB-0161 · Accredited by TURKAK. AB-0235-P)